Telewell TW-EAV510-AC V2 User Manual download pdf (Page 120)

120

Name: user-defined name for identification.

WAN Interface: Select the exact WAN interface configured for the tunnel. Select Default to use the

now-working WAN interface for the tunnel.

Username: Enter the username provided by your VPN Server.

Password: Enter the password provided by your VPN Server.

Auth. Type: Default is Auto if you want the router to determine the authentication type to use, or else

manually specify CHAP (Challenge Handshake Authentication Protocol) or PAP (Password

Authentication Protocol) if you know which type the server is using (when acting as a client), or else

the authentication type you want clients connecting to you to use (when acting as a server). When

using PAP, the password is sent unencrypted, whilst CHAP encrypts the password before sending,

and also allows for challenges at different periods to ensure that an intruder has not replaced the

client.

PPTP Server Address: Enter the IP address of the PPTP server.

Connection Type: Select Remote Access for single user, Select LAN to LAN for remote gateway.

Time to Connect: Select Always to keep the connection always on, or Manual to connect manually

any time.

Peer Network IP: Please input the subnet IP for Server peer.

Peer Netmask: Please input the Netmask for server peer. Click Add button to save your changes.

Example: PPTP Remote Access with Windows7

(Note: inside test with 172.16.1.208, just an example for illustration)

Server Side:

Configuration > VPN > PPTP and Enable the PPTP function, Click Apply.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 168 169

No comments

Telewell TW-EAV510-AC V2 User Manual Page 120