Telewell TW-EAV510 V2 User Manual download pdf (Page 94)

Host Label: User-defined name.

MAC Address: Enter the MAC address(es) you want to allow or block to access the router and LAN.

The format of MAC address could be: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx. For convenience, user

can select from the list box.

Days of the week: Select the days of a week the rule takes efforts.

Start Time: Enter the start time of each day in hh:mm format. Leaving it empty means 00:00.

End Time: Enter the end time of each day in hh:mm format. Leaving it empty means 23:59.

Click Apply to confirm your settings. The following prompt window will appear to remind you of the

attention.

An example:

Here you can see that the user “child_use” with a MAC of 18:a9:05:04:12:23 is blocked to access the

router from 00:00 to 23:59 Monday through Friday.

If you needn’t this rule, you can check the box, press Remove, it will be OK.

URL Filter

URL (Uniform Resource Locator – e.g. an address in the form of http://www.abcde.com or

http://www.example.com) filter rules allow you to prevent users on your network from accessing

particular websites by their URL. There are no pre-defined URL filter rules; you can add filter rules to

meet your requirements.

Note:

URL Filter rules apply to both IPv4 and IPv6 sources.

But in Exception IP Address part, user can click to set the exception IP address(es) for IPv4

and IPv6 respectively.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 168 169

No comments

Telewell TW-EAV510 V2 User Manual Page 94